AXIOM114 rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 1(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXIOM114 rev.: 1 date: 2018-11-06 oscillator type: miniature high stability smd ocxo in 9x14 mm package hermetically-sealed and stratum 3e compliant parameter min. typ. max. unit condition frequency range 10 40 mhz frequency stability overall stability (note 2) 600 ppb initial tolerance 200 ppb 15 mins warm-up @ +25c initial tolerance after reflow (note 3) 40 0 ppb 15 mins warm-up @ +25c vs. operating temperature range 5 ppb ref. to +25c vs. supply voltage variation (pushing) 1 p pb v s 5% vs. load change (pulling) 1 ppb load 10% retrace 50 ppb 24 hrs on/24hrs off/1hr on holdover drift (24 hrs) @ +25c1c 2 ppb after 30 days operation long term (aging) per day 1 ppb afte r 30 days operation long term (aging) 1 st year 100 ppb after 30 days operation long term (aging) 10 years 400 ppb after 3 0 days operation frequency adjustment range electronic frequency control (efc) n.a. rf output signal waveform lvcmos load 15 pf 10% symmetry (duty cycle) 45 55 % @ v s /2 rise & decay time 5 ns @ 10% ~ 90% v s spurious -70 dbc phase noise -75 -105 -130 -140 -145 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz @ 1 hz @ 10 hz @ 100 hz @ 1 khz @ 10 khz warm-up time @ +25c 5 min ? f final /f 0 < 0.1 ppm start-up time 100 ms short-term stability (allan deviation) 510 -11 = 1 s / still air supply voltage v s 3.15 3.3 3.45 v current consumption (steady state) 300 ma @ +25c current consumption (warm-up) 750 ma operating temperature range -40 +85 c enclosure (see drawing) (lxwxh) 15.4x10.6x8.2 max. mm weight 5 g moisture sensitivity level msl1 packing tape & reel iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. overall stability includes initial tolerance, tempe rature stability, pushing, pulling and 10 years agi ng 3. measured 48 hours after reflow
AXIOM114 rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 2(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd storage temperature -40 +105 c ordering code model revision frequency [mhz] AXIOM114 rev.1 10.000 example: AXIOM114_rev.1 C 10.000 mhz enclosure drawing recommended reflow profile pin connections pin # symbol function 1 n.c. no connection 2 n.c. no connection 3 gnd ground 4 rf out rf output 5 n.c. no connection 6 v s supply voltage
AXIOM114 rev.1 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 3(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg handling and testing parameter pro cedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs- compliant yes no environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3x per axes 100g, 6 ms half-sine pulse vibration, sinusoidal 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 07.11.2018 first issue hh hh
|
